Complete set of 25kg products: Component A (5kg plastic barrel) & Component B (20kg bag)
SikaTop® Seal 105 is a 2-component polymer cementitious waterproofing material, the product is applied to mortar or concrete surfaces to waterproof for items: water tanks, basements, terraces, balconies, etc. seno, bridge, retaining wall, patching and treatment of fixed cracks...
Application of SikaTop® Seal 105
SikaTop® Seal 105 is used for waterproofing many interior and exterior items, providing restoration as well as resistance to frost and de-icing agents. Products applied to many fields of waterproofing in construction such as: water tanks, basements, retaining walls, balconies, terraces, bridges, etc.
Features and advantages of SikaTop® Seal 105
SikaTop® Seal 105 is pre-made, just mix the two components A and B in certain proportions to get a uniform waterproof mortar, with high flowability, the product is easy to apply by roller, brush. paint or spray with a paint sprayer.
SikaTop® Seal 105 has the following outstanding features:
The full set of 25kg products includes: Component A (5kg plastic barrel) and Component B (20kg bag)
Component A: White
Component B: Gray
Storage conditions SikaTop® Seal 105
SikaTop® Seal 105 products must be stored safely in their original, unopened and undamaged packaging between 5°C and 30°C in a dry environment. Avoid exposure to direct sunlight.
At least 06 months from the date of manufacture of SikaTop® Seal 105
Specifications of SikaTop® Seal 105
Note: it may be necessary to apply 3 coats for areas with severe water damage.
Construction solution SikaTop® Seal 105
- Surface preparation:
Concrete and mortar surfaces must be free of grease and other impurities. The surface of the absorbent material must be completely saturated before applying the first coat of SikaTop® Seal 105.
Under normal circumstances, when both ingredients are mixed together, a thick, viscous mixture is formed. Mix in a clean bucket, slowly adding the powder ingredients to the liquid ingredients using an electric mixer at low speed (approximately 500 rpm).
- Application: Apply the first coat when the surface is still damp due to saturation. Allow the product to harden for about 4-8 hours at temperatures above 20oC before applying the second coat. Has a paste-like consistency and is applied with a brush or stiff nylon bristled brush. When applying on floors, to avoid the risk of damaging the first coat, wait 24 hours before applying the second coat. If the second coat is applied 12 hours or later, the first coat must be sprayed with a small amount of water first.
- Curing: Usually not required, but care should be taken if applying in direct sunlight or windy places.
- Clean tools: Clean all tools and equipment with water immediately after use. Hardened material can only be cleaned mechanically
For more details and specific construction plan for the project item that needs waterproofing with SikaTop® Seal 105 material, you can immediately contact our company specializing in waterproofing construction Da Nang SK-Sumo for advice. Support counseling.